Products

넳 넲

Classification

ꁆ ꁇ

Kongsberg MP5810 Operator Station Computer | HP RP5 Model 5810 | Hydrographic Work Station | EM2040 Multibeam | DP Dynamic Positioning | Intel Core i3/i5 | 4-8GB DDR3L | 128-256GB SSD | 100-240VAC 240

Original Kongsberg Maritime MP5810 Operator Station Computer (based on HP RP5 Retail System Model 5810, regulatory model Tpc-f056-sf), specifically configured for Kongsberg Hydrographic Work Station, EM 2040/EM 2040P Multibeam Echo Sounder systems, Dynamic Positioning (DP) systems, and K-Chief marine automation operator stations. Equipped with Intel Core i3-4150 (3.5GHz) or i5-4570S (up to 3.6GHz) processor, 4GB or 8GB DDR3L SDRAM (expandable to 32GB), 128GB or 256GB Solid State Drive (SSD), pre

online consultation

Product Details

1. Product Overview

The Kongsberg MP5810 (based on HP RP5 Retail System Model 5810, regulatory model Tpc-f056-sf) is an Operator Station Computer / Hydrographic Work Station configured by Kongsberg Maritime AS of Norway for marine hydrographic survey, dynamic positioning, and marine automation systems. This product uses the Hewlett Packard (HP) commercial RP5 Model 5810 computer as the hardware platform, 经过 Kongsberg special configuration and marine environmental verification, serving as the operator workstation and data processing core for Kongsberg Multibeam Echo Sounder systems (EM 2040, EM 2040P), Dynamic Positioning (DP) systems, K-Chief marine automation systems, etc.

In terms of hardware configuration, the MP5810 is equipped with Intel Core series processors, 可选 Intel Core i3-4150 (3.5 GHz, dual-core four-thread) or Intel Core i5-4570S (up to 3.6 GHz, quad-core four-thread), meeting computing requirements for real-time hydrographic data processing, multibeam sonar data acquisition and imaging, dynamic positioning calculation, marine automation monitoring screen operation, etc. Memory configuration is 4GB or 8GB DDR3L SDRAM, expandable to 32GB, supporting multi-task parallel processing and large data caching. Storage uses 128GB or 256GB Solid State Drive (SSD), which has faster read/write speed, higher shock resistance, and lower failure rate compared to traditional mechanical hard drives, suitable for ship vibration environments. Operating system is pre-installed with Windows 7 Professional or Windows 10 IoT Enterprise, compatible with various Kongsberg hydrographic survey, DP, and automation application software.

In terms of power supply and environmental adaptability, the MP5810 adopts 100/240V AC wide voltage input, 50-60Hz autosensing, input current 4A, equipped with 240W power supply, maximum power consumption approximately 240W, adapting to ship power grid voltage standards in different regions worldwide. Operating temperature range is 0°C to +50°C, relative humidity 5% to 95% (non-condensing), complying with IEC 60945:2002 (Maritime navigation and radiocommunication equipment and systems - General requirements) and IACS E10:2006 (International Association of Classification Societies E10 standard: Electrical equipment in ships) marine environmental requirements, can operate stably in ship bridge, hydrographic lab, engine room control room and other environments. Kongsberg official manual strongly recommends configuring an Uninterruptible Power Supply (UPS) for the Hydrographic Work Station to prevent data loss and system damage caused by sudden power failure.

The MP5810, as the standard configuration computer for Kongsberg Hydrographic Work Station, undertakes core functions such as sonar data acquisition, real-time seabed topography imaging, data recording and post-processing, system monitoring and configuration in EM 2040 and EM 2040P multibeam echo sounder systems. In Dynamic Positioning (DP) systems, the MP5810 serves as an operator station running DP application software, real-time displaying ship position, attitude, environmental forces, thrust allocation, etc., receiving operator commands and sending them to the control system. In K-Chief marine automation systems, the MP5810 can serve as an Operator Station, running monitoring screens, alarm management, trend analysis, report generation and other functions.

This product is a Kongsberg original configured computer, with a 12-month quality warranty. Since the HP RP5 Model 5810 belongs to an earlier commercial computer platform, some configurations may have been discontinued, it is recommended to confirm specific configuration and supply status before procurement.

2. Specifications

表格

Parameter	Value
Brand	Kongsberg Maritime AS (Norway), hardware platform by HP (Hewlett Packard)
Model	MP 5810 / MP5810
Hardware Platform	HP RP5 Retail System, Model 5810
Regulatory Model	Tpc-f056-sf
Product Type	Operator Station Computer / Hydrographic Work Station / Process Control Computer
Applicable Systems	Kongsberg EM 2040 / EM 2040P Multibeam Echo Sounder, Dynamic Positioning (DP) System, K-Chief Marine Automation System
Processor	Intel Core i3-4150 (3.5 GHz, dual-core 4-thread) or Intel Core i5-4570S (up to 3.6 GHz, quad-core 4-thread)
Chipset	To be confirmed (reference Intel Q87 or equivalent commercial chipset)
Memory	4GB or 8GB DDR3L SDRAM, expandable to 32GB
Memory Slots	To be confirmed (reference 2 or 4 DDR3L DIMM slots)
Storage	128GB or 256GB Solid State Drive (SSD)
Storage Interface	To be confirmed (reference SATA III 6Gb/s)
Optical Drive	To be confirmed (optional DVD-RW or no optical drive configuration)
Graphics	To be confirmed (reference Intel HD Graphics 4400/4600 integrated, or discrete graphics configuration)
Display Output	To be confirmed (reference VGA + DisplayPort or DVI)
Network Interface	To be confirmed (reference 2 Gigabit Ethernet ports, Intel I217LM or equivalent)
USB Interface	To be confirmed (reference USB 3.0 + USB 2.0, front and rear configuration)
Serial Interface	To be confirmed (reference RS-232 serial port, for marine equipment communication)
Audio	To be confirmed (reference HD Audio, front and rear audio interfaces)
Operating System	Windows 7 Professional or Windows 10 IoT Enterprise
Power Input	100/240 V AC, 50-60 Hz, autosensing
Input Current	4A
Power Supply Rating	240W
Maximum Power Consumption	Approximately 240W
Power Efficiency	To be confirmed (reference 80 PLUS certified)
Operating Temperature	0°C ~ +50°C (Kongsberg marine configuration, complies with IEC 60945)
Storage Temperature	To be confirmed (reference -20°C ~ +60°C)
Operating Humidity	5% ~ 95% RH (non-condensing)
Protection Degree	To be confirmed (reference IP20, commercial computer standard)
Dimensions (D×W)	Approximately 379 mm (Depth) × 338 mm (Width), height to be confirmed (reference approx. 100mm, SFF)
Weight	To be confirmed (reference approx. 5-8 kg)
Chassis Type	To be confirmed (reference SFF small form factor or USDT ultra-slim desktop)
Mounting Method	Desktop placement, rack mounting (requires optional rack mount kit), or console embedded installation
Cooling Method	Air cooling (built-in fan)
Security Features	To be confirmed (reference BIOS password, chassis lock, Kensington lock slot, TPM security chip)
Marine Standards	IEC 60945:2002 and CORRIGENDUM 1:2008, IACS E10:2006
Classification Society Certification	To be confirmed (as Kongsberg system component, obtains DNV/ABS/LR/BV etc. certification with system)
EMC Standard	To be confirmed (reference IEC 60945 related EMC requirements, CISPR 22 Class B)
Reliability	To be confirmed (commercial computer MTBF, SSD configuration improves shock resistance)
Official Documentation	Kongsberg Hydrographic Work Station Instruction Manual, EM 2040/EM 2040P Installation & Maintenance Manual
Country of Origin	To be confirmed (HP global manufacturing, Kongsberg completes configuration and software pre-installation in Norway or locally)
HS Code	To be confirmed (reference 84714100 or 84715000, automatic data processing equipment)
Stock Status	Order available
Warranty Period	12 months

3. Key Features

Kongsberg Original Configured Hydrographic Work Station — The MP5810 is the operator station computer officially designated by Kongsberg for Hydrographic Work Station, Multibeam Echo Sounder systems (EM 2040/EM 2040P), Dynamic Positioning (DP) systems, and marine automation. Based on HP RP5 Model 5810 platform 经过 Kongsberg special configuration and verification, pre-installed with Kongsberg application software and drivers, ensuring complete compatibility and optimal performance with EM sonar, DP systems, and K-Chief automation systems.
Intel Core Processor for Real-Time Data Processing — Equipped with Intel Core i3-4150 (3.5GHz dual-core) or i5-4570S (up to 3.6GHz quad-core) processor, meeting computing requirements for real-time multibeam sonar data acquisition and processing, real-time seabed topography imaging, dynamic positioning calculation, marine automation monitoring screen operation, supports multi-task parallel processing, ensuring fast system response and smooth operation.
Large Memory and SSD Storage, High Reliability Shock Resistance — 4GB or 8GB DDR3L SDRAM memory (expandable to 32GB), supports large hydrographic data caching and multiple software running in parallel. Uses 128GB or 256GB Solid State Drive (SSD), which has faster system boot and software loading speed, higher shock and vibration resistance, lower failure rate and noise compared to traditional mechanical hard drives, especially suitable for ship vibration and rolling environments, improving system reliability.
100/240VAC Wide Voltage Global Adaptation — Adopts 100/240V AC wide voltage input, 50-60Hz autosensing, input current 4A, 240W power supply, adapting to ship power grid voltage standards (110V/220V/240V, 50Hz/60Hz) in different regions and different ships worldwide, no manual voltage switching required, convenient to use, maximum power consumption approximately 240W, reasonable energy consumption.
Marine Environmental Standard IEC60945/IACS E10 Certified — Operating temperature 0°C to +50°C, humidity 5% to 95% RH non-condensing, complying with IEC 60945:2002 (Maritime navigation and radiocommunication equipment and systems - General requirements) and IACS E10:2006 (International Association of Classification Societies E10 standard), 经过 Kongsberg marine environmental verification, can operate stably in ship bridge, hydrographic lab, engine room control room and other environments.
Standard Workstation for Multibeam Echo Sounder Systems — As the standard Hydrographic Work Station for Kongsberg EM 2040 and EM 2040P multibeam echo sounder systems, undertakes core functions such as sonar data acquisition, real-time 3D seabed topography imaging, water column data recording, sonar parameter configuration, data quality monitoring, post-processing and export, is the key computing platform for marine surveying, channel surveying, seabed topography investigation, marine engineering survey and other operations.
Dynamic Positioning and Automation Operator Station — Can serve as operator station for Kongsberg Dynamic Positioning (DP) systems, running DP application software, real-time displaying ship position, heading, attitude, environmental forces (wind/current/wave), thrust allocation, joystick commands, etc., supports operator for DP mode selection, parameter setting, manual operation. Can also serve as operator workstation for K-Chief marine automation systems, running monitoring screens, alarm management, trend analysis, report generation and other functions.
Rich I/O Interfaces for Marine Equipment Connection — Equipped with rich input/output interfaces, including Gigabit Ethernet ports (for connecting sonar processor, DP sensor network, marine automation network), USB interfaces (for external storage, printer, GPS, etc.), serial interface (RS-232, for connecting marine navigation equipment, sensors, external communication devices), display output (VGA/DisplayPort/DVI, connecting monitor or large screen), audio interface, etc., meeting connection requirements of various marine equipment.
Commercial-Grade Reliable Platform, Easy Maintenance — Based on HP commercial RP5 platform, with mature stability of commercial computers and global service support. Modular design, memory, hard drive, power supply and other components are replaceable, easy maintenance. SSD configuration has no moving parts, improving shock resistance and reliability. Supports Kensington lock and chassis lock, preventing unauthorized disassembly, suitable for use in public ship areas.
UPS Recommended for Data Security — Kongsberg official manual strongly recommends configuring an Uninterruptible Power Supply (UPS) for the Hydrographic Work Station, preventing loss of hydrographic data being acquired, abnormal system shutdown and hardware damage caused by ship power grid fluctuation or sudden power failure. With UPS, can normally save data and safely shut down after power failure, protecting valuable survey data and system hardware.

4. Typical Applications

Multibeam Echo Sounder Hydrographic Work Station: Standard Hydrographic Work Station for Kongsberg EM 2040, EM 2040P and other multibeam echo sounder systems, undertaking sonar data acquisition, real-time seabed topography imaging, data recording and post-processing, system configuration and monitoring
Marine Hydrographic Survey and Seabed Topography Mapping: Data acquisition and processing platform for multibeam echo sounding, side scan sonar, sub-bottom profiler and other hydrographic survey operations on oceanographic research vessels, channel survey vessels, hydrographic survey vessels
Marine Engineering Survey: Data processing for bathymetric survey and topography mapping in pre-investigation and construction monitoring of offshore wind power, offshore oil & gas, subsea pipelines, cross-sea bridges, ports and waterways
Dynamic Positioning (DP) System Operator Station: Operator station computer for Kongsberg DP systems (K-Pos etc.), running DP application software, displaying ship position/attitude/environmental forces/thrust allocation, receiving operator manipulation commands
Marine Automation Operator Workstation: Operator workstation for K-Chief 500/600/700 marine automation systems, running monitoring screens, alarm management, trend analysis, report generation, equipment control and other functions
Ship Engine Room Monitoring and Alarm: Operator station for ship engine room monitoring and alarm system (MAS), displaying engine room equipment operating parameters, alarm information, trend curves, supporting alarm acknowledgement and equipment control
Ship Ballast and Cargo Monitoring: Data processing and display terminal for ballast water, cargo tank level/temperature/pressure monitoring systems on bulk carriers, tankers, chemical carriers, LNG carriers, etc.
Ship Power Station Automation: Monitoring operator station for ship main switchboard, emergency switchboard, power management system (PMS), displaying generator operating parameters, load distribution, fault alarms
Ship Navigation and Integrated Bridge: Data processing and display terminal for Integrated Bridge System (IBS), ECDIS, radar, AIS and other navigation equipment (need to confirm specific configuration)
Ship Data Server and Recording: Data storage and processing platform for Voyage Data Recorder (VDR), ship data server, log recording system
Offshore Platform Automation Monitoring: Operator station for automation systems on offshore drilling platforms, production platforms, FPSO, FSRU and other offshore facilities, monitoring platform production equipment, utility systems, safety systems
Special Ship Mission Computer: Mission computer and data processing platform for research vessels, icebreakers, engineering vessels, naval auxiliary vessels, salvage vessels and other special ships
Old System Upgrade and Replacement: Fault replacement or upgrade replacement of operator station computer for old ship hydrographic survey systems, DP systems, automation systems, restoring system functions
New Shipbuilding System 配套: Supporting operator station computer for newly built ship Kongsberg EM multibeam systems, DP systems, K-Chief automation systems

5. Model Explanation

Product Model: MP 5810 / MP5810

Hardware Platform: HP RP5 Retail System, Model 5810

Regulatory Model: Tpc-f056-sf

Product Description: Operator Station Computer / Hydrographic Work Station, for Kongsberg EM 2040/EM 2040P Multibeam Echo Sounder, DP System, K-Chief Marine Automation System

Model code breakdown:

MP: Possibly "Multi-Processor" or "Marine Processor" or Kongsberg internal product series code
5810: Corresponds to HP RP5 Model 5810 hardware platform model

Official Documentation Confirmation:

Kongsberg Hydrographic Work Station Multibeam Echo Sounder Instruction Manual clearly states: "Hydrographic Work Station - MP5810, Make and model: HP MP5810"
Kongsberg EM 2040 Installation Manual clearly states: "Hydrographic Work Station, HP MP5810, Make and model"
Kongsberg EM 2040P Maintenance Manual clearly states: "Hydrographic Work Station: Hewlett Packard MP5810"
Voltage requirement: 100/240 VAC, 50 to 60 Hz, autosensing
Maximum power consumption: 240 W (Approximately)
Operating temperature: 0 to +50 °C
Relative humidity: 5 to 95% Non-condensing
Compliant standards: IEC 60945:2002 and CORRIGENDUM 1:2008, IACS E10:2006
Dimensions: 379 mm Depth × 338 mm Width (height to be confirmed)
Manufacturer: Kongsberg Maritime AS, P.O. Box 483, NO-3001 Kongsberg, Norway; hardware platform manufactured by HP (Hewlett Packard)

Key Parameters Summary:

表格

Parameter	Value
Type	Operator Station Computer / Hydrographic Work Station
Hardware Platform	HP RP5 Model 5810
Processor	Intel Core i3-4150 or i5-4570S
Memory	4GB/8GB DDR3L (expandable to 32GB)
Storage	128GB/256GB SSD
Operating System	Windows 7 Pro / Windows 10 IoT
Power Supply	100-240VAC, 50-60Hz, 4A, 240W
Operating Temperature	0°C ~ +50°C
Standards	IEC 60945, IACS E10

Related Models (reference):

表格

Model	Description
MP5810	This product, HP RP5 Model 5810 operator station computer
HP RP5 Model 5810	Original hardware platform model (HP commercial retail system)
Tpc-f056-sf	Regulatory model
EM 2040	Kongsberg multibeam echo sounder system (uses MP5810 as hydrographic work station)
EM 2040P	Kongsberg portable multibeam echo sounder system (uses MP5810 as hydrographic work station)
K-Pos	Kongsberg Dynamic Positioning (DP) system (may use MP5810 as operator station)
K-Chief	Kongsberg marine automation system (may use MP5810 as operator station)

Important Note: The MP5810 is a computer product, not an I/O module. Some suppliers in the market incorrectly describe it as "multi-channel analog output module" or "multi-processor board", this information is inconsistent with Kongsberg official documentation. Please refer to the "HP MP5810 Hydrographic Work Station / Operator Station Computer" clearly stated in Kongsberg official manuals.

Brand: Kongsberg Maritime AS, global leading marine automation, ocean technology and hydrographic survey equipment company, headquartered in Kongsberg, Norway

6. Installation & Usage Instructions

Pre-Installation Preparation:

Confirm MP5810 model and hardware configuration (processor, memory, hard drive, operating system) match system requirements
Confirm required application software (Kongsberg EM multibeam software, DP software, K-Chief monitoring software, etc.) is pre-installed or installation media is available
Prepare Uninterruptible Power Supply (UPS) — strongly recommended by Kongsberg
Prepare monitor, keyboard, mouse and other peripherals
Prepare network cables (connecting sonar processor, DP sensor network, ship LAN)
Prepare serial communication cables (if needed to connect external marine equipment)
Read Kongsberg Hydrographic Work Station Instruction Manual and corresponding system (EM 2040/DP/K-Chief) installation manuals

Installation Notes:

Computer should be installed in a dry, well-ventilated, low-vibration location, such as bridge console, hydrographic lab, engine room control room, etc.
Avoid installing near heat sources (such as heaters, high-power equipment) and direct sunlight
Ensure sufficient heat dissipation space around the computer (reference at least 50-100mm spacing), do not block ventilation holes
Computer should be placed horizontally, avoid tilting and severe vibration
If installing in rack or console, need optional corresponding rack mount kit, and ensure good ventilation
Power must be supplied through UPS, UPS capacity should meet total power consumption of computer and peripherals (recommended at least 500VA)
Good grounding, computer power plug should be grounded, avoid static electricity and electromagnetic interference
Keep away from strong electromagnetic interference sources (such as radar, frequency converters, high-power radio equipment), or take shielding measures
Network cables use shielded twisted pair, routed separately from power cables
Before first power-on, check all connections, confirm power voltage setting is correct (this model is autosensing, no manual setting required)

Connection Instructions:

Power Connection: Plug computer power cord into UPS output socket, UPS plugs into ship power. Confirm voltage is within 100-240V AC range
Monitor Connection: Connect monitor signal cable (VGA/DisplayPort/DVI) to corresponding display output interface on computer, monitor power connects to UPS
Keyboard and Mouse Connection: Plug keyboard and mouse into USB interfaces (recommended to use front or rear USB 2.0/3.0 interfaces)
Network Connection:
- Gigabit port 1: Connect to ship LAN/Internet (for data transmission, remote support, software updates)
- Gigabit port 2: Connect to sonar processor/DP sensor network/automation dedicated network (for real-time data communication)
- If only one network port, connect to corresponding network according to system requirements
Serial Connection: If need to connect GPS, compass, echo sounder and other external equipment, use RS-232 serial port connection, pay attention to baud rate, data bits, stop bits, parity and other parameter settings
USB Peripherals: When connecting external hard drive, USB flash drive, printer and other devices, plug into USB interface, note USB 3.0 interface is usually blue
Audio Connection: If need audio output (alarm sound, prompt tone), connect speakers or headphones to audio output interface

Power-On and System Configuration:

First turn on UPS power, confirm UPS output is normal
Turn on monitor power
Press power button on computer front panel to turn on
Observe boot process, confirm BIOS self-test is normal, no hardware error alarm
System boots into Windows operating system
For first use, confirm system time and date are correct (ship navigation may cross time zones, need to pay attention to time zone setting)
Confirm network connection is normal, IP address configuration is correct (static IP or DHCP, according to system requirements)
Confirm Kongsberg application software (EM multibeam software/DP software/K-Chief monitoring software) is correctly installed and licensed
Confirm software dongle (if required) is plugged into USB interface
Test application software starts normally, can normally connect to external devices (sonar, sensors, automation system)
Configure system backup strategy, regularly backup important data and configurations
Set system automatic update strategy (for ship systems, recommended manual updates when in port, avoid updates during navigation causing problems)
Record computer name, IP address, software version, license information, etc., include in system documentation

Usage Notes:

During hydrographic survey operations, do not turn off computer or exit acquisition software, avoid data loss
Do not plug in unknown USB flash drives or install unauthorized software during survey, prevent viruses and system conflicts
Regularly clean computer dust, keep ventilation holes clear
Regularly check cable connections, especially in high-vibration areas, prevent loosening
When ship is in port, recommended to perform system maintenance: software updates, virus scanning, disk cleanup, data backup
If system freezes or becomes unresponsive, first try normal restart; if frequent freezes, check hardware (memory, hard drive, temperature) and software conflicts
When hard drive fails, immediately replace backup SSD and restore system image, therefore recommended to make system recovery image in advance
Do not plug/unplug internal components such as memory, hard drive while powered on
Discarded computers and hard drives should be disposed of per ship garbage management regulations and e-waste regulations, hard drives need data destruction

Maintenance Recommendations:

Regularly (recommended every 3-6 months) check computer operating status, fan operation, temperature
Regularly (recommended every 1-3 months) backup important data and system configurations to external storage
Regularly (recommended every 6-12 months) clean computer internal dust (requires professional operation)
Recommended to stock spare memory modules, SSD hard drives, power supplies and other vulnerable components as ship spare parts
Recommended to make system recovery USB drive or system image, facilitating quick recovery when system crashes
Pay attention to Kongsberg software updates and security patches, update at appropriate time
If computer hardware fails, can replace spare part and restore system, faulty computer returned to Kongsberg or authorized service provider for repair
Since HP RP5 Model 5810 platform is older, long-term spare part supply may be limited, recommended to evaluate system upgrade plan

Safety Notes:

Computer has high-voltage components inside, may still have residual voltage after power-off, non-professionals should not open the chassis
Before replacing internal components, must power off and wait at least 30 seconds, wear anti-static wrist strap
Computer operates at 100-240V AC voltage, pay attention to electric shock hazard during maintenance
Maintenance of computers involved in ship safety systems (DP, automation monitoring) must follow ship safety management regulations, notify captain and duty personnel if necessary, take temporary alternative measures
Hydrographic survey data is valuable achievement, must regularly backup, prevent data loss caused by hard drive failure
Discarded hard drives need data destruction (physical destruction or professional erasure), prevent sensitive data leakage

7. Why Choose Us

Original Configuration, Quality Guaranteed — All products sourced directly from Kongsberg Maritime factory or authorized channels, ensuring MP5810 operator station computer is Kongsberg official configuration, pre-installed with genuine operating system and Kongsberg application software (if applicable), with factory configuration instructions and quality documents, provides 12-month warranty. Standard lead time 4-8 weeks, rush orders can be coordinated for expedited delivery.
Worldwide Delivery — Supports DHL, FedEx, UPS and other international couriers. Can also ship via your designated freight forwarder to 200+ countries, can arrange ship port delivery. Computer products use shock-proof and moisture-proof professional packaging, ensuring transportation safety.
Professional Technical Support — Provides selection consultation (confirming hardware configuration compatibility with EM multibeam/DP/K-Chief systems, operating system version, software license requirements), installation guidance, system configuration support, network setup guidance, fault diagnosis and system recovery recommendations, helping you correctly install and maintain ship operator station computers.
Flexible Procurement and Configuration — Supports standard configuration procurement, can also customize configuration according to your needs (memory upgrade, hard drive expansion, operating system selection, application software pre-installation). Supports single unit procurement and bulk project orders, tiered pricing discounts with quantity, can provide new shipbuilding project-specific quotations and ship spare part packages.
Pre-shipment Inspection — Power-on test, hardware configuration verification (CPU/memory/hard drive model and capacity), operating system boot test, interface function test, appearance and packaging inspection performed before shipment, ensuring delivered products have accurate configuration, normal functions, and are intact.

8. Frequently Asked Questions (FAQ)

Q1: What exactly is this MP5810? Is it an I/O module or a computer?

A: The MP5810 is an operator station computer, not an I/O module. According to Kongsberg official documentation (Hydrographic Work Station Instruction Manual, EM 2040/EM 2040P Installation & Maintenance Manual), the complete description of MP5810 is "Hydrographic Work Station - MP5810, Make and model: HP MP5810", which is a Hydrographic Work Station / Operator Station Computer configured based on HP RP5 Retail System Model 5810 hardware platform, regulatory model Tpc-f056-sf.

Its main uses are:

As Hydrographic Work Station for Kongsberg EM 2040/EM 2040P multibeam echo sounder systems, running sonar data acquisition and processing software
As operator station for Dynamic Positioning (DP) systems, running DP application software
As operator workstation for K-Chief marine automation systems, running monitoring and alarm software

Some suppliers in the market incorrectly describe the MP5810 as "multi-channel analog output module" (8-channel 4-20mA) or "multi-processor board", this information is inconsistent with Kongsberg official documentation and belongs to erroneous description. Please refer to Kongsberg official manuals. If you need an analog output module, the corresponding Kongsberg product is RMP420 (Remote Multipurpose I/O Module, supports analog output) or other dedicated modules.

Q2: What hardware configurations are available for MP5810? Which configuration does my system need?

A: The MP5810 is based on HP RP5 Model 5810 platform, common configurations are as follows:

表格

Configuration Item	Available Options
Processor	Intel Core i3-4150 (3.5GHz, dual-core 4-thread) or Intel Core i5-4570S (up to 3.6GHz, quad-core 4-thread)
Memory	4GB or 8GB DDR3L SDRAM, expandable to 32GB
Storage	128GB or 256GB Solid State Drive (SSD)
Operating System	Windows 7 Professional or Windows 10 IoT Enterprise
Optical Drive	Optional DVD-RW or no optical drive

How to choose configuration:

EM multibeam hydrographic work station: Recommended i5 processor + 8GB memory + 256GB SSD, real-time multibeam data processing and imaging requires strong computing capability and large memory cache
DP system operator station: Recommended i5 processor + 8GB memory + 256GB SSD, DP real-time calculation and multi-screen display require good performance
K-Chief automation operator station: i3 processor + 4GB memory + 128GB SSD usually can meet basic monitoring needs, but if need to run multiple monitoring screens, trend analysis, report generation simultaneously, recommended to upgrade to i5 + 8GB
Old system replacement: Recommended to choose same or higher configuration as original system, ensure software compatibility
Note: Specific configuration requirements should be subject to your Kongsberg system design documentation or software supplier requirements. Different versions of EM software, DP software may have different hardware requirements. It is recommended that you provide system model and software version, we can assist in confirming recommended configuration.

Q3: Is MP5810 still in production? What if I can't buy it? Can I use another computer instead?

A: The HP RP5 Model 5810 is an earlier commercial computer platform (around 2014), may have been discontinued or near discontinuation, original factory brand-new supply may be limited. This is a risk to note.

Procurement recommendations:

Prioritize confirming original factory supply: Contact us to inquire whether Kongsberg original factory or global channels still have brand-new MP5810 inventory, some channels may have stock new products
Consider original factory refurbished or spare parts: Kongsberg or authorized service providers may provide refurbished machines or spare parts machines, quality guaranteed
Evaluate system upgrade: If the original system uses older versions of EM/DP/K-Chief software, can consider upgrading to Kongsberg's currently recommended operator station computer platform (Kongsberg updates recommended new models with hardware platform updates)
Used equipment risk: Some suppliers may provide used MP5810, lower price but risks such as hard drive life, hardware aging, no warranty, and may affect classification society certification. We recommend prioritizing brand-new or official refurbished equipment.

Can I use another computer instead?

Technically yes, but need to verify compatibility. Kongsberg application software (EM multibeam software, DP software, K-Chief monitoring software) usually runs on Windows platform, theoretically can run on other computers meeting hardware requirements.
But need to note:
1. Software license and dongle: Kongsberg software usually uses hardware dongle (USB Dongle) for authorization, dongle is not tied to computer, can be used on new computer, but need to confirm software version and authorization
2. Hardware interface compatibility: Marine systems may require serial interface (RS-232), specific network interface, dedicated acquisition card, etc., replacement computer needs corresponding interfaces or additional expansion cards
3. Classification society certification: If the computer is part of a certified marine system, replacing hardware platform may require re-certification or notifying classification society
4. Kongsberg technical support: Using non-recommended hardware platform, Kongsberg may not provide technical support
Recommendation: If replacement is needed, prioritize choosing Kongsberg's currently recommended operator station computer model, or select a compatible platform under Kongsberg technical support guidance. Do not arbitrarily replace by yourself, to avoid causing system instability or certification issues.

Q4: Does this computer need a UPS? What capacity?

A: Yes, Kongsberg official manual clearly strongly recommends configuring an Uninterruptible Power Supply (UPS) for the Hydrographic Work Station. Original text: "The use of an Uninterruptible Power Supply (UPS) is highly recommended for the Hydrographic Work Station."

Why need UPS:

Prevent data loss: During hydrographic data acquisition, if sudden power failure, data being written may be lost or corrupted, valuable survey results may not be recoverable
Protect hardware: Sudden power failure may cause hard drive (especially SSD) damage, file system corruption, operating system abnormality
Ship power grid fluctuation: Ship power grid may have voltage fluctuation, frequency fluctuation, instantaneous power failure, etc., UPS can regulate voltage and filter, protect computer
Safe shutdown time: UPS provides battery runtime after power failure, allowing operator to normally save data, safely shut down computer and application software

UPS capacity selection:

MP5810 maximum power consumption approximately 240W
Plus monitor (usually 30-100W), network devices, peripherals, etc., total power consumption approximately 300-400W
Recommended to choose 500VA or above online UPS, actual load not exceeding 60-70% of UPS rated capacity
If need longer runtime (such as 15-30 minutes), recommended to choose 1000VA or larger capacity
Recommended to use Online Double Conversion UPS, not Offline/Standby, online UPS provides better voltage regulation and filtering effect, more suitable for ship power grid environments
UPS should have marine environmental adaptability (wide temperature, shock resistance, corrosion resistance), ordinary commercial UPS may have shortened life in marine environments
Note UPS batteries need regular maintenance and replacement (usually 3-5 years), should stock spare batteries on ship

Installation notes:

UPS should be installed in a dry, ventilated location away from heat sources
UPS input power should come from reliable ship power (such as main switchboard or emergency switchboard)
Computer and related peripherals all connected to UPS output
Regularly test UPS battery status (recommended monthly)
When ship is in long-term berth, UPS should remain powered on to maintain battery

Q5: Is this product in stock? What is the lead time? What is the price?

A: This model is currently in order available status. Since the HP RP5 Model 5810 is an earlier commercial computer platform, original factory brand-new inventory may be limited, lead time needs to be confirmed based on global inventory and configuration, standard reference lead time 4-8 weeks.

Price: Specific price subject to our formal quotation, price depends on hardware configuration (i3/i5, memory size, SSD capacity, operating system version), quantity and supply channel. This product is a Kongsberg marine system dedicated operator station computer, price is higher than ordinary commercial computers.
Configuration confirmation: Since this platform may have multiple configurations, and some configurations may have been discontinued, it is recommended that you clearly state when inquiring:
1. Required processor model (i3-4150 or i5-4570S)
2. Memory size (4GB/8GB/larger)
3. Hard drive capacity (128GB/256GB SSD)
4. Operating system (Windows 7 Pro / Windows 10 IoT)
5. Whether need pre-installed Kongsberg application software
6. Quantity and desired delivery time
Expedited service: If you have urgent needs (such as ship failure in port, urgent survey task, tight shipping schedule), we can try to coordinate global stock inventory or refurbished spare parts, specific please contact our sales team.
Alternative solution: If MP5810 cannot be supplied in time, we can assist in evaluating Kongsberg's currently recommended alternative operator station computer model, or provide compatible configuration solution.
Please indicate ship model, system model (EM 2040/DP/K-Chief), software version, installation area, desired delivery time, and destination port when inquiring, we will do our best to coordinate the fastest delivery solution and optimal price.

Q6: How to judge and replace a faulty MP5810? Does software need to be reinstalled?

A: Fault judgment methods:

Power failure: After pressing power button, computer has no response, power indicator off, fan not spinning → may be power supply failure, power cord failure, UPS failure, or motherboard failure
Boot failure: Power light on but cannot boot, black screen or BIOS alarm → may be memory failure, hard drive failure, motherboard failure, or BIOS setting error
System failure: Can boot but Windows cannot enter, frequent blue screen, freeze → may be operating system corruption, hard drive bad sectors, memory failure, software conflict, or virus
Hardware alarm: BIOS beeps during boot (different beep patterns correspond to different hardware failures, such as memory, graphics)
Peripheral failure: A certain interface (USB, network port, serial port, display output) not working → may be interface damage or driver issue
Overheating failure: Automatically shuts down or restarts after running for a while → may be fan failure, dust blockage, poor heat dissipation
Software failure: Kongsberg application software cannot start, reports error, cannot connect to external devices → may be software license issue, network configuration issue, dongle issue, or software corruption

Replacement steps:

Notify duty personnel and captain (if 涉及 safety systems such as DP, automation), explain that computer replacement will be performed
If computer is performing survey or control tasks, first safely stop application software, save data
Normally shut down computer operating system through UPS (Start → Shut Down)
Turn off computer power, turn off monitor and peripherals
Mark all cable connection positions (power, monitor, network, serial, USB, keyboard/mouse), or take photos for record
Disconnect all cable connections
Take out faulty computer, install new computer in the same position
Restore all cable connections per marks
First turn on UPS, then monitor, finally computer
Observe boot process, confirm hardware self-test is normal
Confirm Windows system normally boots
Confirm network configuration correct (IP address, subnet mask, gateway)
Plug in software dongle (if required)
Start Kongsberg application software, confirm software runs normally
Test application software communication with external devices (sonar, sensors, automation system)
Test all peripherals (monitor, keyboard, mouse, printer)
Record replacement date, new computer serial number, configuration information, include in system documentation

Regarding software reinstallation:

If new computer has pre-installed Kongsberg application software and system image: Usually no need to reinstall, can be used directly after boot, but need to confirm software license (dongle) and network configuration
If new computer is bare machine (only operating system): Need to reinstall Kongsberg application software, drivers, configuration parameters, and restore data backup. This requires professional technical personnel, recommended to be completed by Kongsberg authorized engineer
Recommended to prepare in advance:
1. Make system recovery image (clone original computer's complete system to SSD or external hard drive), directly restore to new computer when replacing
2. Regularly backup application software configuration files, project data, license information
3. Save all software installation media and license files
4. Record network configuration parameters (IP address, subnet mask, gateway, DNS)
5. Record software version number and patch level
Note: After computer replacement, if involving classification society certified systems, may need to notify classification society or perform functional testing, confirm system meets certification requirements. Recommended to consult classification society or Kongsberg technical support before replacement.