Products

넳 넲

Classification

Company Culture  ꄲ  Automation  ꄲ  Modules  ꄲ  ABB OEI Interface Board | XV C769 AE101 | 3BHE006373R0101 | Coated Open Edge Interface Board
ꁆ ꁇ

ABB OEI Interface Board | XV C769 AE101 | 3BHE006373R0101 | Coated Open Edge Interface Board

ABB XV C769 AE101 (order no. 3BHE006373R0101) OEI interface board (Coated Open Edge Interface Board), conformal coating protection, 24V DC supply, 2W power consumption, operating temperature -20 to +60°C, storage temperature -40 to +80°C, made in Sweden, weight approx. 0.35kg, for signal interface and communication processing in ABB medium voltage drives and industrial control systems. Order available.
online consultation

Product Details

1. Product Overview

The ABB XV C769 AE101 (order number 3BHE006373R0101) is an OEI Interface Board (Coated Open Edge Interface Board) manufactured by ABB Group, belonging to ABB's industrial control system and medium voltage drive system series. It is a key interface module used for signal interface processing, communication conversion, and system expansion in industrial automation and drive systems, widely applied in ABB medium voltage drive systems such as ACS6000, industrial automation control systems, and human-machine interface (HMI) systems.

This OEI interface board features conformal coating protection design, with a protective coating covering the circuit board surface, effectively preventing moisture, dust, chemical gases, salt spray, and other environmental factors from eroding the circuit board, significantly improving long-term operational reliability and service life in harsh industrial environments. It is particularly suitable for use in industrial sites with relatively harsh environmental conditions such as petrochemical, metallurgy, mining, ports, and offshore platforms. The conformal coating also provides good electrical insulation, preventing leakage and short circuits between adjacent solder joints and traces, improving system electrical safety performance.

In terms of electrical performance, the XV C769 AE101 adopts industrial standard 24V DC power supply (voltage range 24V DC ±10%, Contact via email for specific range confirmation), with power consumption as low as approximately 2W, generating minimal heat and suitable for long-term continuous operation. The low-power design not only reduces overall system energy consumption but also decreases heat dissipation requirements, helping to improve overall system reliability. The power input features reverse polarity protection and overvoltage protection (reference same-series ABB control boards), adapting to complex power supply environments in industrial sites and preventing module damage due to reversed power connection or abnormal voltage.

This interface board features a plug-in board structure design, installed in an ABB dedicated control rack or backplane, performing high-speed data exchange with the main control unit, I/O modules, communication modules, and other system modules via the backplane bus to form a complete industrial control system. The Open Edge Interface design allows this board to flexibly connect and communicate with various external devices and systems, implementing signal conversion, protocol conversion, data acquisition, and control command transmission functions. The modular design makes system expansion and maintenance very convenient, allowing flexible configuration of interface quantities and types according to application requirements.

In terms of environmental adaptability, the XV C769 AE101 has an operating temperature range of -20°C to +60°C, a storage temperature range of -40°C to +80°C, and relative humidity of 0% to 95% RH (non-condensing), adapting to temperature and humidity conditions of most industrial sites. Vibration resistance reaches 0.5 g RMS (10 Hz to 500 Hz), shock resistance reaches 5 g (11 ms), meeting industrial standard requirements, suitable for use on industrial equipment with significant vibration (such as rolling mills, crushers, construction machinery, marine vessels). It features industrial-grade electromagnetic compatibility (EMC), passing strict industrial standard tests, and can operate stably in strong electromagnetic interference environments (near VFDs, motors, welding machines). Made in Sweden, manufactured by ABB's Swedish factory with reliable quality, weighing approximately 0.35 kg.

This OEI interface board plays an important interface function in ABB medium voltage drive systems (such as the ACS6000 series), and can be used to connect external sensors, encoders, human-machine interfaces, host computer systems, and other devices, implementing signal acquisition, status feedback, parameter setting, and control command transmission functions. In industrial automation control systems, this board can serve as an expansion interface module, increasing system I/O capability and communication capability to meet complex application scenario requirements. Specific technical specifications such as interface types, communication protocols, and I/O channel quantities are subject to ABB official data sheet and product manual; Contact via email for confirmation.

Note: This product XV C769 AE101 (3BHE006373R0101) is an ABB OEI interface board. In public information, various suppliers have different descriptions of some technical parameters (such as communication interface type and quantity, I/O channel quantity, specific dimensions, protection degree, applicable system models, etc.). The above parameters use reliable information confirmed through multi-source cross-verification (24V DC supply, 2W power consumption, -20 to +60°C operating temperature, -40 to +80°C storage temperature, 0-95% RH humidity, 0.5g vibration, 5g shock, made in Sweden, 0.35kg weight, conformal coating protection). Other uncertain parameters are subject to ABB official data sheet; Contact via email for confirmation. Installation and replacement must be performed by professional engineers trained by ABB, strictly following electrical safety operation procedures and ABB system installation and maintenance manuals.

2. Specifications

表格

Parameter Value
Brand ABB (Asea Brown Boveri, Swiss/Swedish multinational group)
Model XV C769 AE101 (also written as XVC769AE101)
Order No./Part No. 3BHE006373R0101
Product Type OEI Interface Board (Coated Open Edge Interface Board)
Product Functions Signal interface processing, communication conversion, system expansion, data acquisition and control command transmission
Applicable Systems ABB medium voltage drive systems (such as ACS6000 series), ABB industrial control systems, HMI systems (Contact via email for specific model confirmation)
Coating Protection Conformal coating, moisture/dust/chemical gas/salt spray resistant
Supply Voltage 24V DC (±10%, Contact via email for specific range)
Power Consumption Approx. 2W
Reverse Polarity Protection Yes (reference same-series ABB control boards)
Overvoltage Protection Yes (reference same-series ABB control boards)
Mounting Plug-in board, installed in ABB dedicated control rack/backplane
Backplane Bus ABB dedicated high-speed backplane bus (Contact via email for protocol and speed)
Communication Interface Contact via email (public information descriptions inconsistent, subject to ABB official data sheet)
Communication Protocols Contact via email (public information descriptions inconsistent, subject to ABB official data sheet)
I/O Channels Contact via email (public information descriptions inconsistent, subject to ABB official data sheet)
Digital Inputs Contact via email
Digital Outputs Contact via email
Analog Inputs Contact via email
Analog Outputs Contact via email
Electrical Isolation Contact via email (reference ≥1.5kV isolation)
Status Indicators Contact via email (reference onboard LED status indicators)
Operating Temperature -20°C ~ +60°C
Storage Temperature -40°C ~ +80°C
Relative Humidity 0% ~ 95% RH (non-condensing)
Vibration Resistance 0.5 g RMS, 10 Hz ~ 500 Hz
Shock Resistance 5 g, 11 ms
EMC Industrial grade (Contact via email for specific standards and levels)
Protection Degree Contact via email (plug-in module installed inside control cabinet, reference IP20)
Certifications/Standards Contact via email (CE, UL, cUL, etc.)
Origin Sweden
Weight Approx. 0.35 kg
Dimensions Contact via email (public information descriptions inconsistent, subject to ABB official data sheet)
Matching Rack/Backplane Requires ABB dedicated control rack/backplane (Contact via email for model confirmation)
Matching Power Module Requires ABB dedicated power module (Contact via email for model confirmation)
Replacement Model Contact via email for confirmation
Minimum Order Quantity 1 unit
HS Code Contact via email (reference 8537 electrical control board or 8542 integrated circuits)
Stock Status Order available
Warranty 12 months

5. Model Explanation

Model: XV C769 AE101

Order No./Part No.: 3BHE006373R0101

Product Description: ABB OEI interface board (Coated Open Edge Interface Board), conformal coating protection, 24V DC supply, 2W power consumption, -20 to +60°C operating temperature, made in Sweden, for ABB medium voltage drives and industrial control systems

XV C769 AE101 Model Overview:

  • XV C769 AE101 is the model of ABB OEI interface board
  • OEI = Open Edge Interface, also interpreted by some sources as Operator Equipment Interface
  • Conformal coating protection (Coated), suitable for harsh industrial environments
  • 24V DC industrial standard power supply, low power design
  • Plug-in board structure, installed in ABB dedicated control rack/backplane
  • Made in Sweden, industrial-grade quality
  • Applicable to ABB medium voltage drive systems and industrial control systems

Order No. 3BHE006373R0101 Explanation:

  • 3BHE prefix is the part number prefix for ABB industrial automation/drive system products
  • 3BHE006373R0101 is the globally unified part number/order number for the XV C769 AE101 OEI interface board
  • When purchasing, please provide both the model (XV C769 AE101) and order number (3BHE006373R0101) to ensure accurate supply

Applicable System Series (reference):

表格

System Series Description
ACS6000 ABB medium voltage AC drive system, power range 3kW to 27MW, for induction motor, synchronous motor, and permanent magnet motor control
ABB Industrial Control Systems Interface expansion for various ABB PLC/DCS control systems
HMI Systems Signal interface and communication processing for human-machine interface systems

Note: The above applicable systems are for reference only, specific compatibility is subject to ABB official technical documentation; Contact via email for confirmation.

Related Products (ordered separately, Contact via email):

  • ABB system control rack/backplane
  • ABB system power module (24V DC input)
  • ABB main control unit/CPU module
  • ABB digital I/O modules (DI/DO)
  • ABB analog I/O modules (AI/AO)
  • ABB communication modules (Profinet, EtherNet/IP, Modbus TCP, Profibus DP, etc.)
  • ABB programming cables and configuration software
  • ABB system termination resistors and termination modules

Official Documentation Reference:

  • ABB ACS6000 Medium Voltage Drive User Manual (Document No. 3BHS212794)
  • ABB ACS6000 Commissioning Manual
  • ABB ACS6000 Service and Maintenance Manual
  • ABB XV C769 AE101 OEI Interface Board Product Data Sheet
  • ABB Control System Installation and Maintenance Manual

6. Why Choose Us

  1. Professional Procurement, Genuine ABB Quality Guaranteed — All ABB interface boards and system modules obtained through professional procurement channels, ensuring genuine ABB original products, with product identification, factory inspection certificates, and technical documentation, 12-month quality warranty. Pre-shipment appearance inspection, model confirmation, order number verification, board component integrity check, coating protection check, connector check, and packaging check performed.
  2. Worldwide Delivery, Professional Industrial Electronics Logistics — DHL/FedEx/UPS international courier, global delivery available. Interface boards and other precision industrial electronic devices use shock-proof moisture-proof anti-static professional packaging (anti-static bag + foam cushioning + rigid carton), ensuring safe transport. Expedited logistics and customs clearance available, delivery to 200+ countries, meeting urgent project and equipment maintenance needs.
  3. Professional Technical Support, ABB Control System Full-process Service — Interface board selection consultation (confirming applicable system model, firmware version, hardware configuration, interface type requirements, communication protocol requirements), installation guidance (rack mounting specifications, power wiring, backplane insertion, terminal wiring, grounding guidance), system configuration (hardware configuration, I/O mapping, communication parameter setting, signal commissioning), fault analysis (alarm code troubleshooting, indicator status diagnosis, communication fault detection, power fault analysis, spare parts replacement guidance, firmware upgrade guidance), and system spare parts list review, helping users correctly select, install and maintain ABB control systems.
  4. Flexible Procurement, Project Bulk and Spare Parts Framework Agreements — Single unit and bulk project orders, tiered discounts. Complete ABB control system package solutions available (interface board + power module + I/O module + communication module + rack + programming cable + configuration software combination) and annual spare parts framework agreements, helping users optimize procurement cost, ensure spare parts supply, minimize system downtime risk. Customized quotations and long-term cooperation solutions available for metallurgy, power, petrochemical, mining, ports, marine, and other industry users.
  5. Pre-shipment Verification, Test Report Available — Appearance, packaging, model, order number checks before shipment; interface board test report available if necessary (appearance inspection, coating protection check, component integrity check, connector check, solder joint quality check, silkscreen identification verification, packaging check, accessory inventory), ensuring delivered product in good condition. For urgent project needs (control system fault repair, production line emergency repair, project commissioning, equipment modification and upgrade), priority inventory coordination and expedited shipping available.

7. Frequently Asked Questions (FAQ)

Q1: What is ABB XV C769 AE101 3BHE006373R0101? What are the main parameters?

A: ABB XV C769 AE101 (order no. 3BHE006373R0101) is an OEI Interface Board (Coated Open Edge Interface Board) manufactured by ABB, used for signal interface processing, communication conversion, and system expansion in ABB medium voltage drive systems and industrial control systems.

Core parameters: Brand ABB, model XV C769 AE101 (also written as XVC769AE101), order no./part no. 3BHE006373R0101, product type OEI Interface Board (Coated Open Edge Interface Board), coating protection conformal coating (moisture/dust/chemical gas/salt spray resistant), supply voltage 24V DC (±10%), power consumption approx. 2W, mounting plug-in board in ABB dedicated control rack/backplane, operating temperature -20°C~+60°C, storage temperature -40°C~+80°C, relative humidity 0%~95% RH non-condensing, vibration resistance 0.5g RMS 10-500Hz, shock resistance 5g 11ms, origin Sweden, weight approx. 0.35kg, applicable systems ABB medium voltage drive systems (such as ACS6000), industrial control systems, HMI systems.

Main applications:

  • Medium voltage drive systems: Signal interface, encoder connection, external device communication, status feedback, and parameter setting in ABB ACS6000 and other medium voltage drive systems
  • Industrial automation control systems: As an expansion interface module, increasing system I/O capability and communication capability, connecting external sensors, actuators, human-machine interfaces, and host computer systems
  • Harsh environment applications: Conformal coating protection makes it particularly suitable for use in industrial sites with relatively harsh environmental conditions such as petrochemical, metallurgy, mining, ports, and offshore platforms

Note: This product is an ABB OEI interface board. In public information, various suppliers have different descriptions of some technical parameters (communication interface type and quantity, I/O channel quantity, specific dimensions, protection degree, applicable system models, etc.). The above core parameters are reliable information confirmed through multi-source cross-verification. Other uncertain parameters are subject to ABB official data sheet; Contact via email for confirmation.

Q2: What is an OEI interface board? What is the function of "Coated" conformal coating protection?

A: An OEI interface board is an interface module used in ABB industrial control systems and medium voltage drive systems. OEI is commonly interpreted as "Open Edge Interface", and some sources interpret it as "Operator Equipment Interface". Its main function is to serve as a bridge between the control system and external devices, implementing signal conversion, protocol conversion, data acquisition, and control command transmission.

Main functions of OEI interface board:

  1. Signal interface conversion: Converts signals from external sensors, encoders, instruments, and other devices into standard signals recognizable by the control system
  2. Communication protocol conversion: Implements conversion between different communication protocols, enabling devices from different manufacturers to interconnect and communicate
  3. Data acquisition: Collects operating status, process parameters, alarm information, and other data from external devices, uploading to the control system
  4. Control command transmission: Sends control commands from the control system to external actuators, drives, control valves, and other devices
  5. System expansion: Serves as an expansion interface for the control system, increasing system I/O points and communication interface quantities
  6. Electrical isolation: Provides electrical isolation between the control system and external devices, protecting the control system from external interference and overvoltage damage

Function of "Coated" conformal coating protection:

"Coated" indicates that the circuit board surface of this interface board is covered with conformal coating, a special protective coating with the following important functions:

  1. Moisture and water resistance: Effectively prevents moisture, water, and condensation from penetrating the circuit board, avoiding leakage, short circuits, and corrosion caused by moisture
  2. Dust and dirt resistance: Prevents dust, fibers, oil, and other contaminants from adhering to the circuit board surface, avoiding insulation degradation and short circuits caused by contaminants
  3. Chemical gas corrosion resistance: Resists erosion by hydrogen sulfide, sulfur dioxide, chlorine, salt spray, and other chemically corrosive gases, particularly suitable for petrochemical, metallurgy, mining, seaside, and other environments
  4. Salt spray resistance: In coastal areas and offshore platforms and other salt spray environments, effectively prevents salt spray corrosion of circuit boards and components
  5. Electrical insulation: The coating provides good electrical insulation performance, preventing leakage and short circuits between adjacent solder joints and traces, improving system electrical safety performance
  6. Vibration and shock resistance: The coating provides certain fixation and protection for surface-mount components, reducing the impact of vibration and shock on component solder joints
  7. Extended service life: Combining the above protection functions, significantly improving long-term operational reliability and service life of the module in harsh industrial environments

Types of conformal coating (reference):

  • Acrylic: Fast drying, easy to repair, good moisture resistance
  • Polyurethane: Good chemical corrosion resistance, excellent insulation performance
  • Silicone: Good high temperature resistance, good flexibility
  • Epoxy: Strongest protection performance, high hardness, but not easy to repair

Specific coating type and thickness are subject to ABB official technical documentation; Contact via email for confirmation. When repairing modules with conformal coating protection, be careful not to use sharp tools to scratch the coating, and after soldering repair, the protective coating needs to be re-applied.

Q3: How to replace a faulty XV C769 AE101 interface board? What should be noted?

A: The XV C769 AE101 is an interface board for ABB control systems. Replacement must be performed by professional engineers trained by ABB, strictly following the steps and precautions below:

Pre-replacement preparation:

  1. Confirm model and order number: Verify the model (XV C769 AE101) and order number (3BHE006373R0101) of the faulty interface board, ensuring the new spare part is completely identical.
  2. Backup system configuration: Before replacement, back up all application programs, hardware configurations, parameter settings, etc. of the control system to a computer or storage medium via ABB programming software.
  3. Record wiring and jumpers: Take photos of all wiring, jumpers, DIP switch settings on the interface board to ensure complete restoration when installing the new board.
  4. Prepare tools: Prepare anti-static wrist strap, Phillips screwdriver, tweezers, multimeter, etc.
  5. Safety confirmation: Ensure the system is shut down, relevant power supplies are disconnected, and lockout/tagout (LOTO) measures are taken to prevent accidental power-up.

Replacement steps (reference):

  1. Power off: Disconnect all power supplies of the control system (including 24V DC control power and possible backup power), wait at least 5 minutes for capacitor discharge.
  2. Anti-static: Wear an anti-static wrist strap and ground it reliably to prevent electrostatic damage to electronic components on the interface board.
  3. Remove faulty board:
    • Disconnect all wiring and external connectors on the interface board (note marking each cable position)
    • Loosen the fixing screws or release the latches of the interface board
    • Pull out the faulty interface board smoothly along the backplane slot direction
    • Place the faulty board in an anti-static bag for storage
  4. Install new board:
    • Check the new interface board for no appearance damage, intact coating protection, no component 脱落，no connector deformation
    • Verify the new board model and order number match the faulty board
    • Insert the new interface board smoothly along the backplane slot direction, ensuring fully inserted
    • Tighten fixing screws or engage latches
    • Restore all wiring and external connectors according to previously recorded photos
    • Check jumper and DIP switch settings match the faulty board
  5. Pre-power-on check:
    • Check all wiring is correct and no looseness
    • Check no tools, screws, or other foreign objects around the interface board
    • Confirm power supply voltage is within normal range (24V DC ±10%)
  6. Power-on test:
    • Turn on control power, observe status indicators on the interface board
    • Power indicator should be normal
    • Run/communication indicator should blink or be steady on normally
    • Fault indicator should not be steady on
    • If abnormal, immediately power off and check
  7. System commissioning:
    • Connect to the control system via ABB programming software
    • Check if hardware configuration recognizes the new interface board
    • Perform I/O test and communication test
    • Confirm all signals are transmitted normally
    • Gradually restore system operation

Replacement precautions:

  1. Electrostatic protection: The interface board has many CMOS devices sensitive to static electricity. Always wear an anti-static wrist strap during operation, hold only the board edges, do not touch components, solder joints, and coating surface on the circuit board with hands.
  2. Coating protection: The new board has conformal coating. Do not use sharp tools to scratch the coating, do not touch the coating surface with hands (oil on hands will affect coating adhesion).
  3. Power safety: Before replacement, must completely power off, including main power and backup power (such as UPS, redundant power), wait for capacitors to fully discharge.
  4. Model consistency: Must use exactly the same model (XV C769 AE101) and order number (3BHE006373R0101). Different versions of interface boards may have firmware and hardware differences.
  5. Configuration backup: Must backup system configuration and parameters before replacement.
  6. Professional operation: Replacement must be performed by professional engineers trained by ABB. Personnel without relevant qualifications and experience should not attempt replacement.
  7. Waste disposal: The replaced faulty interface board is electronic waste, should be properly disposed of according to local environmental regulations, do not discard casually.

For replacement guidance or technical support, please Contact via email; we can provide remote technical guidance or arrange on-site engineer services.

Q4: In stock? Lead time? Price?

A: Currently Order Available. Specific stock of ABB interface board products fluctuates with market.

  • Lead time: Standard 4-8 weeks (ABB industrial interface boards are industrial-grade customized products, some common configurations may be in stock, specific subject to formal quotation).
  • Price: Subject to formal quotation, depends on specific model configuration, quantity, supply channel, whether includes technical service and on-site commissioning support, etc. Bulk procurement enjoys tiered discounts.
  • Package solutions: Complete ABB control system package solutions available (interface board + power module + I/O module + communication module + rack + programming cable + configuration software combination), combined procurement price more favorable. If the system requires other spare parts, it is recommended to purchase at the same time.
  • Expedited service: For urgent needs (control system fault repair, production line emergency repair, project commissioning, equipment modification and upgrade), we can try to coordinate stock or expedited ordering, please contact sales team.
  • Please indicate: required quantity, desired delivery time and destination, specific model and order number, applicable system model (ACS6000 or other), whether matching other modules needed, whether installation commissioning and technical support services needed when inquiring; we will coordinate fastest delivery and optimal price.
ꄴPrevious： ABB Capacitor Module | 3BHL000986P7002
ꄲNext： ABB Control Board | UFC789AE101 | 3BHE014023R0101 | AC 800PEC High-Performance Control Unit